Built for Every Application
HYTORC offers the latest bolting technology.
Not sure which tool fits your application?
AVANTI
The largest torque range in its class, with a patented reaction drive and no back-end reaction arm needed.
View product →
MXT
The world's best-selling industrial bolting system, with over 100,000 units in use since 1990 across every major industry.
View product →
MXT+
Award-winning MXT evolution with coaxial reaction, auto-release, and a cycle counter for rugged, repeatable performance.
View product →
EDGE S
A 3-moving-part design with a 360°x180° Uniswivel and removable square drive for quick Torque/Loosen switching.
View product →
STEALTH
Slim body fits where other tools cannot, with a 360°/180° Uniswivel and optional hands-free tool retainer.
View product →
XLCT
Excels in low-clearance scenarios with the largest variety of specialty links and broadest torque range in the lineup.
View product →
VERSA
Fits into the smallest clearances with a simple 3-moving-part design and a 360° Uniswivel for easy positioning.
View product →
Lithium Series II
The most advanced electric torque tool in the market, with dual rundown/torque modes and 8 models up to 8,000 ft-lbs.
View product →
LION GUN
Cord-free, lightweight electric torque tool with an intuitive display and low-vibration design for portable, durable performance.
View product →
LION GUN X
Cord-free, ±5% accurate electric torque tool with a 36V battery and torque range up to 3,000 ft-lbs.
View product →
LION GUN Dual Speed
The fastest electric torque wrench in the lineup, with shift-collar rundown and torque modes.
View product →
Centerlock Kit
A preconfigured LION GUN kit for single-person center lock wheel tightening — no counter-holding required.
View product →
jGun Digital Speed
FRL-free pneumatic torque tool with a built-in silencer and digital readout for instant torque confirmation.
View product →
jGun Single Speed
Accurate, repeatable torque with an industry-leading power-to-weight ratio and no kickback.
View product →
jGun Dual Speed
The industry's most reliable pneumatic torque tool combining rapid run-down with substantial torque output.
View product →
Pneumatic Impact Wrench
Fast, consistent power that accelerates the bolting process and boosts job productivity.
View product →
Dual Spline Fixture
Two sets of interlocking ridges help the tool hold onto the bolt tightly, making it easier to turn without slipping.
View product →
Crab Nut Fixture
Acts as an anchor point to secure and stabilize tools during operation.
View product →
Reaction Pad
For low-clearance bolting.
View product →
Track Pad Fixture
Spans neighboring fasteners, quickly giving you a secure reaction point.
View product →
Wheel Gun Extension
Great for bolting in hard-to-reach areas or confined spaces, like deep inside a wheel well.
View product →
HYTORC Washer Driver
Two-piece socket and reaction canister that eliminates pinch points while keeping the bolt straighter during tightening.
View product →
HYTORC Nut Driver
Applies precise tension to the bolt to prevent thread damage and ensure load accuracy.
View product →
Eco Line Sockets
Available in various sizes, including standard, deep well, 6-point, and 12-point options to meet diverse bolting needs.
View product →
Offset Links
Slim link style socket that easily converts your square drive tool into a low clearance tool.
View product →
Backup Wrenches
Stops the back nut from turning.
View product →
Electric Power Supply (EPS)
Delivers consistent, uninterrupted power to HYTORC battery torque tools, ensuring optimal performance.
View product →
Filter, Regulator, and Lubricator (FRL)
Ensures pneumatic tools receive clean and lubricated air, at a consistent preset pressure.
View product →
Hydraulic Hoses
KEVLAR fiber and steel wire construction; 38mm bend radius, 700 bar (tested to 2,758 bar), 4:1 safety factor. Quick Coupler compatible; meets prEN 13204, ISO 7751, and American Jacking standards.
View product →
Topside Standard
A quality, cost-efficient tensioning solution for standard flanges — compact and easy to handle.
View product →
Topside Spring Return
Improved efficiency and load capacity with spring-return functionality for more demanding applications.
View product →
Wind Single Stage
Wind turbine tensioners engineered for applications with limited overhead clearance.
View product →
Wind Multi Stage
Wind turbine tensioners designed for bolting applications where radial clearance is restricted.
View product →
Subsea
Designed for continuous use in demanding subsea environments, made from high-quality materials.
View product →
Wind Foundation
Multiple designs for foundation tensioning on wind turbines, for studs ranging from 1" to 3".
View product →
Direct Fit Tensioners
One-piece design ideal for limited clearance applications and overhead work.
View product →
Hydraulic Nuts
Designed to tighten large diameter bolts without the damage typical of hammer wrenches.
View product →
HYTORC Washer
The simplest upgrade for instant improvements in safety, speed, and accuracy. Eliminates reaction arms and reduces bolt load variation.
View product →
HYTORC J-Washer
Features a locking mechanism that minimizes loosening to keep bolts tight under dynamic loads.
View product →
HYTORC Nut
A three-piece fastener that applies pure tension to prevent thread damage and ensure bolt load accuracy.
View product →
VECTOR MINI
The world's most advanced hydraulic power pack with LCD pendant control and automated regulation.
View product →
VECTOR
Advanced hydraulic pump with LCD pendant control and automated regulation for intuitive industrial bolting.
View product →
VECTOR FA
Upgradeable pump that transitions from manual to fully automatic documentation capability.
View product →
HY-115
Reliable, efficient, and economical electric power pack with superior market performance.
View product →
HY-TWIN 230
Twin-motor, 3-stage pump delivering twice the speed and oil flow of competing systems.
View product →
HY-EX 3-Stage
Electric pumps that serve as the backbone of an intrinsically safe bolting system.
View product →
JetPro-S
Portable professional pump offering reliability and high speed for tools up to 10,000 ft-lbs.
View product →
JetPro 18.3
High-performing pump designed for efficient operation with large hydraulic systems.
View product →
HY-AIR
Standard air power packs suited for explosive environments or areas without electricity access.
View product →
HY-TWIN AIR
Air-powered pump capable of powering up to four large tools simultaneously at 10,000 ft-lbs.
View product →
JetPro S-Air
The most affordable lightweight pneumatic pump on the market.
View product →
Subsea Hydraulic Pump
Stainless steel pump with doubled reservoir size designed for offshore environments.
View product →
PES Hydraulic Pump
Versatile pump capable of running multiple tools reliably, recommended for construction applications.
View product →
HBT Pneumatic
Available in standard and high flow rates with built-in filter, regulator, and lubricator.
View product →
Hand Pumps
Lightweight, portable pumps with varying pressures and built-in gauges.
View product →
HY Series Hydraulic Pumps
Latest tension pump design — lighter and more compact than comparable market options.
View product →
1507-E Hydraulic Pump
Heavy-duty pump with 3-phase, 690V motor for the most demanding jobs.
View product →
LIGHTNING PUMP Smart
The market's fastest single-motor battery pump with a 7-inch touchscreen, automatic torque calculation, IP65 rating, and built-in data capture.
View product →
LIGHTNING PUMP Standard
The market's fastest single-motor battery pump with a 48V / 1170 Wh system, IP65 weather rating, and analog gauge operation.
View product →
Clicker Torque Wrench
A micro-adjustable manual torque wrench with dual-scale laser etching, available from 2.5–600 ft-lb with ISO certified calibration.
View product →